Инструкции:

1. Изтеглете файла, съдържащ инсталацията на програмите CYPE:
2. Декомпресирайте в произволна папка на хард диска
3. Отворете папката, съответстваща на избрания език
4. Следвайте инструкциите за инсталация на екрана

Изтеглете пълната версия (3.21 GB)

• Подобрения във версия 2014.m (28 май 2014)
• Подобрения във версия 2014.l (25 Април 2014)
• Подобрения във версия 2014.k (9 Април 2014)
• Подобрения във версия 2014.j (24 март 2014)
• Подобрения във версия 2014.i (6 март 2014)
• Подобрения във версия 2014.h (3 февруари 2014)
• Подобрения във версия 2014.g (24 януари 2014)
• Подобрения във версия 2014.f (20 декември 2013)
• Подобрения във версия 2014.e (27 ноември 2013)
• Подобрения във версия 2014.d (30 октомври 2013)
• Подобрения във версия 2014.c (20 Септември 2013)
• Подобрения във версия 2014.b (8 Август 2013)
• Други версии
  
  

Подобрения във версия 2014.m (28 май 2014)

• Code application improvements
  • Concrete code
    • Eurocode 2 (Rumania)

Подобрения във версия 2014.l (5 май 2014)

• New programs
  • Cumprimento REH existentes (Portugal)
• Code implementation and improvements in its application
  • Loads on structures. Wind loads
    • Eurocode 1 (Rumania)
• CYPECAD
  • Floor slab sheet editor for precast, reinforced and prestressed joists for Mexico

Подобрения във версия 2014.k (10 април 2014)

• New programs
  • Building energy rehabilitation analysis (Spain)
    
    
    
    
    

Подобрения във версия 2014.j (24 март 2014)

• Code implementation and improvements in its application
  • Loads on structures. Wind loads
    • NTDV 1997 (El Salvador)
• CYPECAD
  • Export to IFC. Definition of column ends

Подобрения във версия 2014.i (6 март 2014)

• Code implementation and improvements in its application
• Cold-formed steel code
• L and Z cold-formed sections for:
  AISI/NASPEC-2007 (LRFD) (USA)
  AISI/NASPEC-2007 (LRFD) (Mexico)
  CAN/CSA S136-07 (Canada)
• Code regarding loads on structures. Seismic loads
• Norma técnica de diseño por sismo (El Salvador)

• CYPECAD
• Analyse the structure without obtaining the reinforcement
• Implementation and update of ATEX (Brazil) removable form waffle slabs

Подобрения във версия 2014.h (3 февруари 2014)

• Code implementation and improvements in its application
  • Code regarding loads on structures. Seismic loads
    • ABNT NBR 15421:2006 (Brazil)
• Continuous beams
  • Maximum node width

Подобрения във версия 2014.g (27 януари 2014)

Индекс

• Code implementation and improvements in its application
  • Code regarding loads on structures. Seismic loads
    • COVENIN 1756‑1:2001 (Venezuela); NEC ‑11 (Ecuador); Norma Técnica E.030 (Peru)
• CYPECAD
  • Interaction of the structure with the construction elements
    • Automatic generation of intermediate states
  • Post-tensioned slabs. Point deviation loads of straight sloped tendon spans and representation of the horizontal component of the anchorage
  • Calculation of the base shear when floors below ground level are not considered in the dynamic analysis
• CYPE-Connect
  • Joints V. Flat trusses with hollow structural sections

Подобрения във версия 2014.f (20 декември 2013)

Индекс

• New modules and programs
• CYPE-Connect (Structures)
  
  
• Code implementation and improvements in its application
  • Concrete code
    • SP 63.13330.2012 (Russia)
  • Cold-formed steel code
    • AS 4600:2005 (Australia)
    • NZS 4600:2005 (New Zealand)
  • Loads on structures. Seismic loads
    • NTC 2004 (Mexico)
    • СНиП II-7-81* (Russia). Ductility reinforcement criteria and capacity design criteria
      
      
• CYPECAD
  • Cover of concrete columns by floor and by column
  • Column fixity coefficients in two directions

Подобрения във версия 2014.e (27 ноември 2013)

Индекс

• Code implementation and improvements in its application
• Loads on structures. Seismic loads.
• NCh433.Of1996 Mod.2009 (Dºnº61. de 2011) (Chile)
• CYPECAD
• Seismic analysis with cracked inertias
• Layout plan with view from above or below the floor slab
• Advanced beam editor
• Plan view to select a frame
• Optimisation of the time required to generate the Detailing of columns plan
• Strut3D
• Implementation of the following codes in Strut3D: CIRSOC 201-2005 (Argentina), IS 456: 2000 (India) and NTC: 14-01-2008 (Italy)
• CYPECAD and Metal 3D
• New library of cold-formed sections: “Profil du Futur” of ARVAL (ArcelorMittal)

Подобрения във версия 2014.d (30 октомври 2013)

Индекс

• Code implementation and improvements in its application
• Concrete code
• ABNT NBR 6118 Projeto Junho 2013 (Brazil)
• Eurocode 2 (EU, France, Portugal)
• Loads on structures. Seismic loads.
• Reinforcement ductility criteria and capacity design criteria for seismic design for Eurocode 8 (EU, France, Portugal and Belgium)
• ASCE 7-10 (USA)
• NC 46:1999 (Cuba)
• NSR-10 (Columbia)
• CYPECAD
• Eurocode 2 (EU, France and Portugal) in the advanced beam editor
• Seismic design
• Reinforcement ductility criteria and capacity design criteria for seismic design for the combination of Eurocode 2 concrete code (EU, France and Portugal) and Eurocode 8 seismic code (EU, France, Portugal and Belgium)
• Fundamental period of the structure with user values for NSR10 (Columbia) and NC 46:1999 (Cuba)
• Dimensions and effective mechanical steel areas of slabs for capacity checks of concrete columns and beams
• Maximum size and nature of the aggregate
• Reduction of the concrete resistance of columns
• Axial stiffness coefficients for columns, shear walls and walls
• Reduction of reinforcement anchorage and splice lengths in columns, only for bars in tension
• Advanced beam editor
• Improvements in the work environment
• Dropped rectangular beams with variable sections
• Divide a bar pack (change the layer of some of  the bars of a pack)
• On-screen consultation of the required and effective areas of the reinforcement of a frame
• Representation of the floor slab in the transverse sections of beams in the frames drawing
• Drawing of secondary beams in the frames drawing
• Strut3D
  • Implementation, in Strut3D, of the following concrete codes: ABNT NBR 6118 2007 (Brazil), ABNT NBR 6118 Projeto Junho 2013 (Brazil) and Eurocode 2 (EU, France and Portugal)
  • Pile displacements

Подобрения във версия 2014.c (26 септември 2013)

Индекс

• Code implementation and improvements in its application
• Loads on structures. Seismic loads.
• CFE 2008 (Mexico) and NTC 2004 (Mexico)
• CIRSOC 103-2005 (Argentina)
• CYPECAD
• Seismic analysis. Fundamental period of the structure with user values for CFE 2008 and NTC 2004 Mexican design codes
• Advanced beam editor
• Representation of the reinforcement when editing openings
• Improvements in the edition of beam assembly reinforcement tables
• Averaging of required reinforcement areas in slabs

Подобрения във версия 2014.b (2 септември 2013)

Индекс

• Code implementation and improvements in its application
• Concrete code
• ACI 318M-08 (USA), Nch430.Of2008 (Chile), NTE E.060: 2009 (Peru) and NSR-10 (Columbia)
• IS 456: 2000 (India)
• Cold-formed steel code
• S280GD and S320GD steels for Eurocode 3 (EU) and EAE (Spain)
• Loads on structures. Seismic loads
• CHOC-08 (Honduras)
• CIRSOC 103-2005 (Argentina)
• СНиП II-7-81* (Russia)
• Thermal insulation
• D.P.R. 2 aprile 2009, n.59 (Italy)
• CYPECAD
• Interaction of the structure with the construction elements
• Calculation of the properties of the masonry construction elements
• Advanced beam editor
• Vertical openings in beams
• Horizontal and vertical openings in beams are not eliminated after analysing or redesigning
• Capacity design criteria for seismic design with CIRSOC 103-2005 (Argentina)
• Analysis time optimisation during the design of columns using the IS 456: 2000 code (India)
• Post-tensioned slabs
• Move tendon anchorages
• Export to Tekla Structures (CYPECAD and Metal 3D)