Инструкции:

1. Изтеглете файла, съдържащ инсталацията на програмите CYPE:
2. Декомпресирайте в произволна папка на хард диска
3. Отворете папката, съответстваща на избрания език
4. Следвайте инструкциите за инсталация на екрана

Изтеглете пълната версия (2.80 GB)

• Подобрения във версия 2013.o (21 юни 2013)
• Подобрения във версия 2013.n (27 май 2013)
• Подобрения във версия 2013.m (30 април 2013)
• Подобрения във версия 2013.l (18 април 2013)
• Подобрения във версия 2013.k (15 март 2013)
• Подобрения във версия 2013.j (15 февруари 2013)
• Подобрения във версия 2013.i (21 януари 2013)
• Подобрения във версия 2013.h (21 декември 2012)
• Подобрения във версия 2013.g (10 декември 2012)
• Подобрения във версия 2013.f (16 ноември 2012)
• Подобрения във версия 2013.e (6 ноември 2012)
• Подобрения във версия 2013.d (13 септември 2012)
• Подобрения във версия 2013.c (10 август 2012)
• Подобрения във версия 2013.b (1 август 2012)
• Други версии

• New features in CYPECAD
• Rounding of lengths in the Advanced beam editor
• Measurement units of span lengths
• New features in CYPECAD MEP
• Certification of CYPECAD MEP for Italy
• Étude thermique (France)
• Improvements in the “Description des systèmes RT 2012” report
• Telecommunication (Spain)
• Intermediate amplification in the design of the ICT radio and television broadcasting network 
• New features in Arquimedes
• Gantt chart task updating
• Construction details manager – Construction details library for structures

• Code implementations and improvements in their application
  • Loads on structures. Seismic loads
    • NEC-11 (Ecuador)
  • Thermal and energy regulations
    • RT2012 (France)
    • UNI/TS 11300-2 (Italy)
• New features in CYPECAD
  • Pile caps for piles with an eccentric column
  • Advanced beam editor
  • Seismic analysis. Ductility reinforcement criteria and capacity design criteria for seismic design of concrete columns and beams with the NEC-11 (Ecuador) code.
  • Bill of quantities of the structure using the Price generator of Chile.
• New features in CYPECAD MEP
  • New countries in CYPECAD MEP (Algeria, Cameroon, Chile, Ivory Coast, Gabon, Republic of Congo and Senegal)
  • Import assistant for the new CALENER VYP (Spain) library
  • Sanitation. Water supply (Spain and Portugal)
    • Improvements in management of water supply manifolds
    • Improvements in management of water supply regulator tanks
    • New consumption. Urinal with flushometer
    • Simultaneity coefficients for consumption with flushometers (only for Portugal)
  • Air conditioning
    • Geothermal energy harvesting systems
  • Electricidade (Brazil)
    • Span labelling
    • Move labels after the analysis
    • Electric distribution in two-phase system
    • Generic two-phase charge
    • Collective closed channels
    • Multi-line diagrams
  • Étude thermique (France)
  • Studio termico (Italy)
    • UNI/TS 11300-2
    • Inclusion of linear thermal bridges not detected automatically
  • Improvement in the export to IFC2x3 and IFC4 of hot sanitary water accumulation systems and other equipment of the solar thermal energy installation
• New features in Arquimedes
  • Export to Excel of the sales and study budgets
  • Connection with Allplan 2013 (64-bit) and ArchiCAD 16 (64-bit)

• Improvements in code application
  • Concrete code
    • ACI 318M-08 (USA)
    • NTE E.060: 2009 (Peru)
  • Loads on structures. Seismic loads
    • NBDS-2006 (Bolivia)
    • Norma Técnica E.030 (Peru)
  • Thermal insulation
    • RITE (Spain)
  • Lighting
    • ABNT NBR 5413 (Brazil)
  • Electricity
    • ABNT NBR 5419: 2005 (Brazil)
• Export to IFC4 format from CYPECAD and CYPECAD MEP
• New features in CYPECAD
  • Seismic analysis. Automatic calculation of the number of vibration modes
  • Seismic analysis. Seismic design criteria for concrete beams and columns with the NBDS-2006 (Bolivia) and Norma Técnica E.030 (Peru) codes
  • Column, shear wall and footing quantity export to Arquimedes
  • Export to IFC4 format
• New features in CYPECAD MEP
  • Export to IFC format. Export to IFC4 format
  • Export to IFC format. Export of more air conditioning systems
    • Geothermal heat pumps and geothermal energy harvesting systems
    • Improved export to IFC of Air conditioners
    • Improved export to IFC of water handling systems
• New features in Arquimedes and Job control

• Code implementations and improvements in their application
• Concrete code
• CIRSOC 201-2005 (Argentina)
• Loads on structures. Seismic loads
• CIRSOC 103-2008 (Argentina)
• CIRSOC 103-2005 (Argentina)
• CSCR-2010 (Costa Rica)
• ASCE 7-05 (USA); IBC 2009 (USA); 2011 PRBC (Puerto Rico). Static seismic loads and correct due to base shear
• New features in CYPECAD
  • Application of the concrete and seismic codes of Argentina in CYPECAD (CIRSOC 201-2005, CIRSOC 103-1991, CIRSOC 103-2005 and CIRSOC 103-2008)
  • Seismic analysis with force amplification in open floors or with partitions that are less rigid than on other floors
  • Post-tensioned floor slabs
    • Specific parameters for each span of a tendon
  • Advanced beam editor of CYPECAD
    • Elimination of the shift of the bending moment diagrams with the IS 456:2000 (India) code.
    • Layout configuration of the grouped frame references in the frames drawings.
• Document styles

• Code implementations and improvements in its application
  • Loads on structures. Seismic loads
    • 1997 UBC (USA)
• New features in CYPECAD
• Advanced beam editor of CYPECAD
• Improved consultation of U.L.S. and S.L.S. checks
• Advanced column editor of CYPECAD
• Improved consultation of U.L.S. checks
• Post-tensioned concrete slabs
  • Distance between the tendons and the top surface at intermediate supports
  • Representation of the deviation loads when editing the tendons
• Capacity design criteria for seismic design of concrete columns and beams with the 1997 UBC (USA) code
• New features in Metal 3D
  • U.L.S. checks
    • Improved consultation of U.L.S. checks
• Punching shear verification
  • Punching shear reinforcement using beams

• New modules
• Post-tensioned concrete slabs for buildings (CYPECAD)
• Improvements in code application
• Concrete code
• ABNT NBR 6118:2007 (Brazil)
• NSR-10 (Colombia) (Título C Concreto estructural)
• Loads on structures. Seismic loads
• Capacity design criteria for seismic design of concrete columns and beams with the NSR-10 (Colombia) code
• NBDS-2006 (Bolivia)
• NC 46:1999 (Cuba)
• NC 46:1999 (Cuba); NSR-10 (Colombia)
• NCh433.Of1996 (Chile)
• New features in CYPECAD
  • Capacity design criteria for seismic design of concrete columns and beams with the NSR – 10 (Colombia) code
  • Advanced beam editor of CYPECAD
    • Position of the cursor in the areas graph
    • Automatic change of the areas graph depending on the type of reinforcement that is being edited
    • Consult span deflections
    • Extended and improved error information
    • Maintenance of the active option within the editor when another frame is selected
    • Maintenance of the floating menu positions
    • Bar anchorage in accordance with user defined options
    • Representation of confinement zones
    • Improvements of drawings with reinforcement detailing only in tables
  • Export to IFC
• Punching shear verification
• Implementation of the ABNT NBR 6118:2007 (Brazil) concrete code
• Reading of the user license key file (clv)

• Improvements in code application
  • Concrete code
    • ACI 318M-08 (USA)
  • Loads on structures. Seismic loads
    • Capacity design criteria for seismic design of concrete columns and beams with the ACI 318M-08 (USA) code
    • CHOC-04 (Honduras). Static analysis and correction due to base shear
    • NSR-10 (Columbia). Microzonification of Pereira
    • ASCE 7­05 (USA); 2009 IBC (USA); CFE93 (Mexico); CFE 2008 (Mexico); CPE INEN 5:2001 (Ecuador); NSE­10 (Guatemala); CHOC­04 (Honduras); REP‑04 (Panama); R­001 2011 (Dominican Republic); COVENIN 1756‑1:2001 (Venezuela)
• New features in CYPECAD
  • Capacity design criteria for seismic design of concrete columns and beams with the ACI 318M-08 (USA) code
  • Beam editor of CYPECAD
    • ACI 318M-08 (USA) in the new beam editor
    • Unlimited number of longitudinal reinforcement layers
    • Design optimisation of longitudinal reinforcement anchorage
    • Direct access to CYPECAD’s Beam editor from the Beam errors dialogue box
  • Export to IFC for the 2012 and 2013 versions of Revit Architecture from CYPECAD

• Improvements in code application
  • Concrete structures
    • NTC: 14-01-2008 (Italy)
  • Loads on structures. Seismic loads
    • Capacity design criteria for seismic design of concrete columns and beams
    • REP - 04 (Panama). Static analysis and correction due to base shear
• New features in CYPECAD
  • Capacity design criteria for seismic design of concrete columns and beams
  • Beam editor of CYPECAD
• New features in Punching shear verification
  • Implementation of NTC: 14-01-2008 (Italy)
  • Improvements in Design check reports
• New features in Continuous beams

• Improvements in code application
  • Loads on structures. Seismic loads
    • Capacity design criteria for seismic design of concrete columns and beams
    • CHOC-04 (Honduras), COVENIN 1756-1:2001 (Venezuela) and NSE-10 (Guatemala)
    • COVENIN 1756-1:2001 (Venezuela). Static analysis and correction due to base shear
• New features in CYPECAD
  • Capacity design criteria for seismic design of concrete columns and beams
• Beam editor of CYPECAD
  • Re-design frame reinforcement
  • Block/Unblock frame reinforcement
  • Join assembly or skin reinforcement
  • Maintenance of the lateral menu configuration
• New features in Punching shear verification
  • Representation of the plan view of the punching shear reinforcement in drawings
  • Implementation of examples designed in accordance with Eurocode 2
• New features in Continuous beams

• New programs
  • Punching shear check (Structures)
• Code implementation and improvements in its application
• Concrete structures
• IS 456: 2000 (India) in CYPECAD's new beam editor
• Code regarding loads on structures. Wind loads
• RNC-07 (Nicaragua)
• Code regarding loads on structures. Seismic loads
• RNC-07 (Nicaragua)

• New features in CYPECAD
• Beam editor in CYPECAD
• IS 456:2000 (India) in the new beam editor
• Curve radius representation for bent bars
• Edition of beam reinforcement tables
• Export to IFC
• Export of castellated beams and removable forms of waffle floor slabs
• Assign layers to the exported elements

• New features in Continuous beams
• Reinforcement tables. Allowable diameters depending on the depth of the beam